:  Jun 28, 2004



. Fully extend the steering column for access.

. Remove the steering wheel.

. Remove the instrument panel center reinforcement.

. Remove the driver side register trim panel.

. Remove the instrument panel access panel.
  Release the 2 clips.




. Remove the steering column upper shroud.
  Release the 6 clips.




. Remove the steering column lower shroud.
  Remove the 3 Torx screws.
  Release the steering column adjustment lever.




. Remove the steering column side trim panel.
  Release the clips.
  Repeat the above procedure for the other side.




. Disconnect the 2 electrical connectors from the steering column multifunction switches.



. Disconnect the 2 electrical connectors from the clockspring.



. Remove the steering column switch assembly.
  Remove the 4 Torx bolts.




. Remove the steering column gaiter panel.
  Remove the 2 Torx screws.
  Release the 2 clips.




. Remove the instrument cluster.
  Remove the 2 Torx screws.
  Disconnect the electrical connector.




. Release the air temperature sensor.
  Release the 2 clips.




. Release the on-board diagnostic connector.
  Remove the 2 Torx screws.




. Remove the instrument panel driver side reinforcement.
  Remove the 11 Torx screws.




. Install the instrument panel driver side reinforcement.
  Tighten the Torx screws.

. Attach the on-board diagnostic connector.
  Tighten the Torx screws.

. Attach the air temperature sensor.
  Secure the clips.

. Install the instrument cluster.
  Connect the electrical connector.
  Tighten the Torx screws.

. Install the steering column gaiter panel.
  Secure with the clips.
  Tighten the Torx screws.

. Install the steering column switch assembly.
  Tighten the Torx bolts to 3 Nm (2 lb.ft).

. Connect the clockspring and multifunction switch electrical connectors.

. Install the steering column side trim panels.
  Secure with the clips.

. Install the steering column shrouds.

. Install the instrument panel access panel.
  Secure with the clips.

. Install the driver side register trim panel.

. Install the instrument panel center reinforcement.

. Install the steering wheel.